RF energy harvesting for low power applications using rectenna operating at 2.45 GHz

M. Awais; S. Rehman; M. Asif; M. R. Usman; Soo Young Shin

doi:10.1109/ICTC46691.2019.8940014

RF energy harvesting for low power applications using rectenna operating at 2.45 GHz

M. Awais
, S. Rehman
, M. Asif
, M. R. Usman
, Soo Young Shin

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

This paper is about the study of radio frequency energy harvesting operating at 2.45 GHz by using rectifier and an antenna named as rectenna. Micro-strip inset-fed rectangular patch is fabricated. A simple rectifier circuit designed to convert antenna AC power into DC with Schottky diodes (HSMS-2850) for RF detection. Antenna‘s design and parameters such as gain, directivity, return loss, voltage standing wave ratio (VSWR) and input impedance are analyzed in high frequency simulator (HFSS). The antenna geometry; width and length of the patch, inset-feed, inset-distance and gap is calculated using MATLAB software. The rectenna model is simulated using advanced design system (ADS) software and the results were found in good agreement.

Original language	English
Title of host publication	Published in: 2019 International Conference on Information and Communication Technology Convergence (ICTC). Piscataway, U.S. : Institute of Electrical and Electronics Engineers, Inc. ISBN 9781728108940, ISSN 2162-1233. Organising Body: Information and Communication Technology Convergence Organising Body: Information and Communication Technology Convergence
DOIs	https://doi.org/10.1109/ICTC46691.2019.8940014
Publication status	Published - 16 Oct 2019

Bibliographical note

Note: Published in: 2019 International Conference on Information and Communication Technology Convergence (ICTC). Piscataway, U.S. : Institute of Electrical and Electronics Engineers, Inc. ISBN 9781728108940, ISSN 2162-1233.

Organising Body: Information and Communication Technology Convergence

Organising Body: Information and Communication Technology Convergence

Keywords

Computer science and informatics

Access to Document

10.1109/ICTC46691.2019.8940014

https://doi.org/10.1109/ICTC46691.2019.8940014

RF energy harvesting for low power applications using rectenna operating at 2.45 GHz
Awais, M., Rehman, S., Asif, M., Usman, R. & Shin, S. Y., 16 Oct 2019.
Research output: Contribution to conference › Paper › peer-review

Cite this

Awais, M., Rehman, S., Asif, M., Usman, M. R., & Shin, S. Y. (2019). RF energy harvesting for low power applications using rectenna operating at 2.45 GHz. In Published in: 2019 International Conference on Information and Communication Technology Convergence (ICTC). Piscataway, U.S. : Institute of Electrical and Electronics Engineers, Inc. ISBN 9781728108940, ISSN 2162-1233. Organising Body: Information and Communication Technology Convergence Organising Body: Information and Communication Technology Convergence https://doi.org/10.1109/ICTC46691.2019.8940014

Awais, M. ; Rehman, S. ; Asif, M. et al. / RF energy harvesting for low power applications using rectenna operating at 2.45 GHz. Published in: 2019 International Conference on Information and Communication Technology Convergence (ICTC). Piscataway, U.S. : Institute of Electrical and Electronics Engineers, Inc. ISBN 9781728108940, ISSN 2162-1233. Organising Body: Information and Communication Technology Convergence Organising Body: Information and Communication Technology Convergence. 2019.

@inproceedings{3d706c40cd084af6a8a74aa6081792a4,

title = "RF energy harvesting for low power applications using rectenna operating at 2.45 GHz",

abstract = "This paper is about the study of radio frequency energy harvesting operating at 2.45 GHz by using rectifier and an antenna named as rectenna. Micro-strip inset-fed rectangular patch is fabricated. A simple rectifier circuit designed to convert antenna AC power into DC with Schottky diodes (HSMS-2850) for RF detection. Antenna{\textquoteleft}s design and parameters such as gain, directivity, return loss, voltage standing wave ratio (VSWR) and input impedance are analyzed in high frequency simulator (HFSS). The antenna geometry; width and length of the patch, inset-feed, inset-distance and gap is calculated using MATLAB software. The rectenna model is simulated using advanced design system (ADS) software and the results were found in good agreement.",

keywords = "Computer science and informatics",

author = "M. Awais and S. Rehman and M. Asif and Usman, \{M. R.\} and Shin, \{Soo Young\}",

note = "Note: Published in: 2019 International Conference on Information and Communication Technology Convergence (ICTC). Piscataway, U.S. : Institute of Electrical and Electronics Engineers, Inc. ISBN 9781728108940, ISSN 2162-1233. Organising Body: Information and Communication Technology Convergence Organising Body: Information and Communication Technology Convergence",

year = "2019",

month = oct,

day = "16",

doi = "10.1109/ICTC46691.2019.8940014",

language = "English",

booktitle = "Published in: 2019 International Conference on Information and Communication Technology Convergence (ICTC). Piscataway, U.S. : Institute of Electrical and Electronics Engineers, Inc. ISBN 9781728108940, ISSN 2162-1233. Organising Body: Information and Communication Technology Convergence Organising Body: Information and Communication Technology Convergence",

}

Awais, M, Rehman, S, Asif, M, Usman, MR & Shin, SY 2019, RF energy harvesting for low power applications using rectenna operating at 2.45 GHz. in Published in: 2019 International Conference on Information and Communication Technology Convergence (ICTC). Piscataway, U.S. : Institute of Electrical and Electronics Engineers, Inc. ISBN 9781728108940, ISSN 2162-1233. Organising Body: Information and Communication Technology Convergence Organising Body: Information and Communication Technology Convergence. https://doi.org/10.1109/ICTC46691.2019.8940014

RF energy harvesting for low power applications using rectenna operating at 2.45 GHz. / Awais, M.; Rehman, S.; Asif, M. et al.
Published in: 2019 International Conference on Information and Communication Technology Convergence (ICTC). Piscataway, U.S. : Institute of Electrical and Electronics Engineers, Inc. ISBN 9781728108940, ISSN 2162-1233. Organising Body: Information and Communication Technology Convergence Organising Body: Information and Communication Technology Convergence. 2019.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - RF energy harvesting for low power applications using rectenna operating at 2.45 GHz

AU - Awais, M.

AU - Rehman, S.

AU - Asif, M.

AU - Usman, M. R.

AU - Shin, Soo Young

N1 - Note: Published in: 2019 International Conference on Information and Communication Technology Convergence (ICTC). Piscataway, U.S. : Institute of Electrical and Electronics Engineers, Inc. ISBN 9781728108940, ISSN 2162-1233. Organising Body: Information and Communication Technology Convergence Organising Body: Information and Communication Technology Convergence

PY - 2019/10/16

Y1 - 2019/10/16

N2 - This paper is about the study of radio frequency energy harvesting operating at 2.45 GHz by using rectifier and an antenna named as rectenna. Micro-strip inset-fed rectangular patch is fabricated. A simple rectifier circuit designed to convert antenna AC power into DC with Schottky diodes (HSMS-2850) for RF detection. Antenna‘s design and parameters such as gain, directivity, return loss, voltage standing wave ratio (VSWR) and input impedance are analyzed in high frequency simulator (HFSS). The antenna geometry; width and length of the patch, inset-feed, inset-distance and gap is calculated using MATLAB software. The rectenna model is simulated using advanced design system (ADS) software and the results were found in good agreement.

AB - This paper is about the study of radio frequency energy harvesting operating at 2.45 GHz by using rectifier and an antenna named as rectenna. Micro-strip inset-fed rectangular patch is fabricated. A simple rectifier circuit designed to convert antenna AC power into DC with Schottky diodes (HSMS-2850) for RF detection. Antenna‘s design and parameters such as gain, directivity, return loss, voltage standing wave ratio (VSWR) and input impedance are analyzed in high frequency simulator (HFSS). The antenna geometry; width and length of the patch, inset-feed, inset-distance and gap is calculated using MATLAB software. The rectenna model is simulated using advanced design system (ADS) software and the results were found in good agreement.

KW - Computer science and informatics

U2 - 10.1109/ICTC46691.2019.8940014

DO - 10.1109/ICTC46691.2019.8940014

M3 - Conference contribution

BT - Published in: 2019 International Conference on Information and Communication Technology Convergence (ICTC). Piscataway, U.S. : Institute of Electrical and Electronics Engineers, Inc. ISBN 9781728108940, ISSN 2162-1233. Organising Body: Information and Communication Technology Convergence Organising Body: Information and Communication Technology Convergence

ER -

Awais M, Rehman S, Asif M, Usman MR, Shin SY. RF energy harvesting for low power applications using rectenna operating at 2.45 GHz. In Published in: 2019 International Conference on Information and Communication Technology Convergence (ICTC). Piscataway, U.S. : Institute of Electrical and Electronics Engineers, Inc. ISBN 9781728108940, ISSN 2162-1233. Organising Body: Information and Communication Technology Convergence Organising Body: Information and Communication Technology Convergence. 2019 doi: 10.1109/ICTC46691.2019.8940014

RF energy harvesting for low power applications using rectenna operating at 2.45 GHz

Abstract

Bibliographical note

Keywords

Access to Document

Fingerprint

Research output

RF energy harvesting for low power applications using rectenna operating at 2.45 GHz

Cite this